Multi-wire dawing machine with Annealer ( 8/16 wires)
Feature:
1. Driven by high precise helical gears; particular oil lubrication mechanism; dual motors drive;
2. Annealing contact copper rings, nickel tubes are made from special alloy; it can ensure a longer service life;
3. The annealer control system is in zero length preset voltage design, so that it can ensure ;
4. A special mechanism is designed to meet requirements of drawing bare copper wires, tinned copper wires and silver plated copper wires.;
Technical specifications
|
Description |
Specification |
|
Suitable material |
Copper wire |
|
Inlet diameter（㎜） |
Max 2.05 |
|
Outlet diameter（㎜） |
8*Φ0.15～0.68(outlet Φ0.15 is with inlet ofΦ1.6mm) |
|
Mechanical speed（m/min） |
Max 1800 |
|
Drawing wheel diameter（㎜） |
100 |
|
Capstan diameter（㎜） |
100 |
|
No of dies |
Max 22 |
|
Elongation |
26%for the first one to the 10th one,21% for the rest dies. |
|
Mechanical transmission ratio |
1.25for the first 10 spindles,1.1944 for the 11th to the 14th,1.1904 for the 15th to the 18th,the spindles from 19th to 21st are driven by capstan motor |
|
Drawing motor power（kw） |
110 |
|
Capstan motor power（kw） |
45 |
|
Transmission method |
gear transmission |
|
Drawing wheel arrangement method |
horizontal arrangement |
|
Drawing lubricant cooling method |
High pressure spray (high pressure hole for both dies and drawing wheels) |
Recommend Product
Non-slip Rod Breakdown Machine